- Education
- Care, Repairs & Remodelling
- Ring Engraving Melbourne
Jewellery services in Melbourne
Ring Engraving Melbourne
A name, a date or a few words turn a ring into your ring. We engrave new pieces, re-cut engraving that has worn away, and remove engraving that no longer belongs.

Quick answer
GemTrove engraves rings and jewellery at our Melbourne CBD showroom, Unit 903/125 Swanston St, Melbourne VIC 3000. We engrave wedding bands, engagement rings, signet rings, pendants, lockets, bracelets and watches, re-cut worn engraving and remove old engraving. You see the layout and get a quote before any work begins. Allow up to 5 weeks; many jobs are finished sooner.
What engraving does GemTrove do?
Engraving is cutting lettering or a design into metal. It is one of the oldest ways of making a piece personal, and one of the simplest. We arrange hand engraving, machine engraving and laser engraving, and choose the method that suits the piece.
- Inside a ring: names, initials, a date, a short message, coordinates.
- Outside a ring: patterns, scrollwork, a line of text around the band.
- Signet faces: a crest, a monogram or initials, cut for show or in reverse as a seal.
- Pendants, lockets and tags: front, back or inside.
- Watches: the case back, for a gift, a retirement or an anniversary.
- Bracelets and bangles: identity bracelets, baby bangles, the inside of a bangle.
- Cufflinks, tie bars and buckles. See custom cufflinks and custom belt buckles.
- Handwriting and fingerprints, copied from a note or a print. See keepsake jewellery.
- Re-cutting engraving that has worn faint.
- Removing engraving and refinishing the surface.
For a message on the diamond itself, seen only under magnification, see personalised diamond engraving.
Hand, machine or laser engraving: which suits your piece?
| Method | How it looks | Suits |
|---|---|---|
| Hand engraving | Bright, deep cuts with the character of a hand-drawn line | Signet crests, scrollwork, heirloom pieces, seal engraving |
| Machine engraving | Even, consistent lettering | Names and dates inside wedding bands |
| Laser engraving | Very fine, precise detail, including images and handwriting | Small lettering, fingerprints, logos, hard metals |
Depth matters as much as method. A shallow engraving inside a ring is rubbed by the finger every day and can fade over the years; a deeper cut lasts. On a signet face, which takes knocks, the engraving has to be deep enough to survive. See milgrain and engraving patterns and signet rings explained.
What can be engraved, and what should you check first?
| Piece | What to check |
|---|---|
| Wedding bands | The width of the band limits the height of the lettering and how much fits |
| Engagement rings | Room inside the band, clear of the hallmark and any stones set through it |
| Eternity rings | A full eternity has little plain metal inside; a short engraving may still fit |
| Signet rings | Whether the face is thick enough for a deep cut; whether it is to be used as a seal |
| Pendants and lockets | Flat or curved surface; thickness of the metal |
| Watches | The material and shape of the case back, and any existing markings. See watch repairs |
| Bangles and bracelets | Whether the piece is solid or hollow; hollow pieces take only light engraving. See bracelet and bangle repair |
| Hard metals | Titanium and tungsten are usually laser engraved |
| Plated pieces | Engraving cuts through plating, so the base metal will show |
If the ring may be resized later, have it sized first and engraved afterwards, because the sizing join can cut through the lettering. See ring resizing and designing a ring for future resizing.
What do people have engraved?
- Initials and a date: the classic for wedding bands.
- A name or a nickname only the two of you use.
- A short phrase in your own language.
- Coordinates of where you met, proposed or married.
- Children's names or birth dates on a pendant or a band.
- A family crest, a monogram or a club emblem on a signet.
- A message for a milestone: a twenty-first, a graduation, a retirement.
- A fingerprint or handwriting of someone you want to keep close.
For wording that lasts, see wedding ring engraving ideas that stay timeless and hidden details that make a ring personal.
Not sure what your piece needs?
Bring it in, or send us clear photos, and our gemologist will tell you what needs doing, what can wait and what we would leave alone.
Can an engraving be removed or re-cut?
Yes. To remove an engraving, the surface is taken down until the cut is gone and then refinished. The piece must have enough metal to allow that, so we measure first. A deep engraving in a thin band may only be softened, not erased, and we tell you before we start.
To re-cut a worn engraving, the original lines are followed and deepened. This is common on signet rings handed down a generation, and on wedding bands after decades of wear. A new engraving can also replace an old one, once the old one is removed.
After a ring is resized, an engraving cut through by the join can be restored. See ring repair and restoration.
How much does ring engraving cost in Melbourne?
We do not publish a set price for engraving, because the work differs so much from piece to piece. The quote depends on what is engraved and how.
- The method. Hand engraving takes the most time and skill.
- How much is engraved. Two initials are not a full crest.
- Artwork. A crest, a logo or handwriting has to be prepared before it can be cut.
- The piece. A flat tag is easier than the inside of a narrow ring.
- Removal first. Taking off an old engraving and refinishing is a job in itself.
- Refinishing. Polishing or plating afterwards, where it is needed.
You see the wording and the layout, and the price, before anything is cut. If you are having the piece made as well, see custom signet rings, custom wedding bands, custom pendants and the men's wedding band guide. A piece is usually given a clean and polish after engraving. How much fits on a diamond is covered in diamond girdle engraving.
How long does ring engraving take?
Allow up to 5 weeks. Many jobs are finished much sooner, and some simple ones take a day or two. The time depends on the work itself, the metal, and whether a stone or a part has to be sourced.
We confirm the time for your piece with the quote, before any work begins. If you need it back for a date, tell us when you book and we will tell you honestly whether it can be done.
Hand-engraved crests take longer than a name and a date.
What do GemTrove customers say?
These are Google reviews from GemTrove customers, quoted word for word.
5.0 on Google
★★★★★
“… Raj has been incredible to work with and guided us through designing both our engagement rings last year and now the wedding rings. … The craftsmanship and attention to detail are outstanding, and the rings turned out even more beautiful than we imagined. …”
Tanveer D.
Google review · engagement and wedding rings
★★★★★
“… i have a very custom ring i was after as it was an engagement ring, what i wanted was exactly what i got …”
Eric G.
Google review · custom engagement ring
★★★★★
“Raj is very friendly and knowledgeable on all things diamonds. I went to him to make an engagement ring for me after seeing all his positive reviews. He helped me design the perfect ring. He listened to everything I was looking for and gave me great advice along the way.”
The Adsta
Google review · engagement ring
★★★★★
“… His advice on the ring size, design, and overall style was invaluable, and he took the time to ensure every detail was perfect. The entire process was smooth, transparent, and completed within the expected timeframe. …”
Seno R.
Google review · engagement ring
★★★★★
“… We wanted to pick out our preferred stone with GIA certification and then the setting (custom made). … Raj acted with efficient communications to ensure for the transaction to move forward. …”
Whiz
Google review · GIA-certified diamond and custom setting
★★★★★
“… I had a deadline too which he went above and beyond to meet. …”
Gary L.
Google review · ring made to a deadline
Read all GemTrove reviews on Google
What happens from drop-off to pick-up?
- Book a visit. Bring the piece, and any artwork for a crest or logo.
- We check the piece. Thickness, space, hallmarks and anything that limits the engraving.
- You choose the wording and lettering. Script, block, serif or your own handwriting.
- You approve the layout and the quote. Check every letter and number; engraving is hard to undo.
- The piece is engraved.
- It is cleaned and finished.
- You collect it.
What would we advise against?
- Long messages in a narrow band. The letters become too small to read and too shallow to last.
- Deep engraving on a thin or hollow piece. It can weaken or pierce the metal.
- Engraving before resizing. Size the ring first.
- Removing an engraving from a band that is already thin. There may not be enough metal.
- Engraving a crest we cannot confirm is yours to use. We engrave what you supply; we cannot confirm heraldry.
- Engraving over a hallmark. The stamps inside a ring say what it is made of. See Australian hallmarks and metal stamps.
Where can you get a ring engraved in Melbourne CBD?
At our showroom on Swanston Street. GemTrove has been in business since 2008, and our family has been in the jewellery trade since 1984. Engraving is quoted once we have seen the piece and the wording; we do not quote a price over the phone.
- Showroom: Unit 903/125 Swanston St, Melbourne VIC 3000 (Level 9), opposite Melbourne Town Hall, by appointment.
- Hours: Monday to Friday 9:30 am to 5:30 pm, Saturday 11:30 am to 1:00 pm, Sunday closed.
- Phone: 0488 878 000.
- Book: book an appointment. Bring the piece, the exact wording written down, and any artwork.
Free consultation
Talk to a gemologist
Compare stones in person or online with Raj Sood, Graduate Gemologist (GIA), AJP (GIA).
Book a consultationFAQ
Common questions
How much does ring engraving cost?
It depends on the method, how much is engraved, and whether artwork or removal is needed. GemTrove quotes after seeing the piece and the wording.
How long does ring engraving take?
Allow up to 5 weeks. Many jobs are finished much sooner, and some simple ones take a day or two. We confirm the time with your quote, before any work begins.
Can you engrave the inside of a wedding ring?
Yes. Names, initials, dates and short messages are engraved inside wedding bands. The width of the band decides how much fits.
Can an engraving be removed from a ring?
Usually, yes. The surface is taken down until the engraving is gone and then refinished, provided the band has enough metal. We check first.
Can you re-engrave a worn signet ring?
Yes. The original crest or initials are followed and re-cut, or the face is cleared and engraved afresh.
Should I engrave my ring before or after resizing?
After. A sizing join can cut through an engraving, so have the ring sized first.
Can you engrave handwriting or a fingerprint?
Yes. Handwriting from a note and a fingerprint from a print can be copied by laser onto a pendant, a ring or a tag.
Terms in this guide

Ask a gemologist
Not sure whether to repair, restore or remake?
Raj Sood is a Graduate Gemologist (GIA) who works alongside our master jewellers. Bring the piece in and he will tell you honestly what it needs, what it does not, and what we would advise against.
Keep learning
Related guides
Wedding Bands & EternityWedding Ring Engraving Ideas That Stay Timeless
Wedding Bands & EternityMilgrain and Engraving Patterns
Jewellery TypesSignet Rings Explained
Care, Repairs & RemodellingPersonalised Diamond Engraving
MetalsAustralian Hallmarks and Metal Stamps
Care, Repairs & RemodellingBracelet and Bangle Repair Melbourne
Jewellery TypesCustom Belt Buckles
Jewellery TypesCustom Buttons & CufflinksExplore more
More guides on this topic
Education
