- Education
- Care, Repairs & Remodelling
- Claw Retipping Melbourne
Jewellery services in Melbourne
Claw Retipping Melbourne
Claws are the small metal tips that hold a stone in place, and they wear down a little every day. We check each one under magnification, rebuild the worn ones, and tell you honestly if the setting needs more than a retip.

Quick answer
GemTrove retips and rebuilds worn ring claws at our Melbourne CBD showroom, Unit 903/125 Swanston St, Melbourne VIC 3000. Our master jewellers add new metal to thin or flattened claws in gold and platinum so the stone is held securely again. Raj Sood, a Graduate Gemologist (GIA), inspects the setting and the stone first, and you get a quote before any work begins. Allow up to 5 weeks.
What is claw retipping?
A claw, also called a prong, is a thin arm of metal that bends over the edge of a stone to hold it. The tip is the part that touches the stone, and it is the part that wears. Claw retipping adds new metal to a worn tip and shapes it back over the stone, so the stone is gripped firmly again.
It is one of the most common ring repairs, and one of the most worthwhile. A worn claw gives very little warning before the stone it holds is gone. Our guide to when ring claws need retipping explains the wear in detail, and engagement ring claw styles shows the shapes a claw can take.
Which claws and settings do we rebuild?
Every kind of claw, on every kind of piece. Claws are not only on engagement rings: earrings, pendants, tennis bracelets and eternity bands all hold their stones the same way, and all wear the same way.
| Setting | What is done |
|---|---|
| Four-claw and six-claw solitaires | Each worn tip rebuilt and shaped to match the others |
| Round, pointed (talon), eagle and tab claws | Rebuilt in the same style, so the ring looks as it did |
| Double claws | Both wires of each pair rebuilt |
| V-claws on pears, marquises, hearts and princess cuts | The V rebuilt to cover the point again, which is where those shapes chip |
| Shared claws on eternity and anniversary bands | The claw between two stones rebuilt; both stones checked |
| Halo and cluster settings | The tiny claws or beads holding each small stone tightened or rebuilt |
| Pavé and micro-pavé | Worn beads raised again, and any missing stones replaced |
| Three-stone and trilogy rings | All three heads checked; side-stone claws wear as fast as the centre |
| Stud earrings and pendants | Three-claw, four-claw and basket settings retipped |
| Tennis bracelets and necklaces | Every setting along the line checked, worn ones rebuilt |
| Antique and platinum settings | Rebuilt in the original metal; laser welding used where heat would risk the stone |
Claw shapes are explained in claw types and engagement ring claw styles. For how often to have them looked at, see when ring claws need retipping.
How do you know your claws need retipping?
- A claw catches on a jumper, your hair or a towel. A lifted or broken tip is the usual cause.
- A tip looks flat or thin. New claw tips are rounded beads. Worn ones look like flat, shiny patches.
- You can see a gap between a claw and the stone when you look from the side.
- One claw is shorter than the others, or a tip is missing.
- The stone moves. Tap the ring gently near your ear, or press the stone lightly with a fingernail. Any click or shift means stop wearing it.
- The ring is old and has not been checked in years.
If the stone already moves, read loose stones and stone tightening and take the ring off until it has been seen. If a stone has already gone, see lost stone replacement.
Retipping, re-clawing or a new setting: which does your ring need?
Not every worn claw is fixed the same way. What we recommend depends on how far the wear has gone.
| Repair | When it is the right one |
|---|---|
| Retipping | The tip is worn but the claw itself is sound |
| Re-clawing | A claw is worn along its length, bent or cracked |
| New head or setting | Several claws and the base they rise from are worn out |
| Tightening only | The claws are sound and the stone has simply shifted |
The design of the setting matters too. A four-claw or six-claw solitaire has thicker claws than a pavé band, where each tiny bead holds two stones. Pointed shapes rely on a V-claw at each point: see claw placement for pointed shapes and claw types. How the head is built changes the repair as well: see basket, trellis and peg-head settings.
Not sure what your piece needs?
Bring it in, or send us clear photos, and our gemologist will tell you what needs doing, what can wait and what we would leave alone.
How is a claw retipped?
New metal is added to the worn tip and shaped until it grips the stone as the original did. The work is done under magnification.
- Clean and inspect. The ring is cleaned so every claw can be seen properly.
- Prepare the tip. The worn surface is filed clean so new metal will bond to it.
- Add metal. A small bead of matching gold or platinum is fused to the tip, with a torch or a laser welder.
- Shape and tighten. The new tip is filed to shape, pressed down onto the stone and polished.
- Test. The stone is checked for any movement, and the other claws are checked again.
White gold is rhodium plated afterwards so the new tips match the rest of the ring. See rhodium plating and replating.
How much does claw retipping cost in Melbourne?
There is no fixed price list for claw work, because the cost follows what the setting needs, and that is only clear under magnification. You get a quote after we have inspected the ring, and nothing is done until you agree. These are the things that move the price:
- How many claws. One worn tip is a small job. A full set on a six-claw solitaire, or a row of pavé beads, is more.
- Retip, re-claw or new head. Adding a tip costs less than replacing a claw, and far less than remaking the setting.
- The metal. Platinum is worked at a higher heat than gold and takes longer. See platinum jewellery.
- The stone. A diamond can usually stay in place. An emerald, opal or treated stone may have to come out, or the work is done by laser.
- The size of the stone. Claws holding a large stone are heavier and need more metal.
- Finishing. White gold is rhodium plated again so the new tips match the rest of the ring.
A claw repair is nearly always a small cost beside replacing the stone it protects. If the setting is too far gone for retipping to be worth it, we will say so, and explain what a new head would involve.
How long does claw retipping take?
Allow up to 5 weeks. Many jobs are finished much sooner, and some simple ones take a day or two. The time depends on the work itself, the metal, and whether a stone or a part has to be sourced.
We confirm the time for your ring with the quote, before any work begins. If you need it back for a date, tell us when you book and we will tell you honestly whether it can be done.
What do GemTrove customers say?
These are Google reviews from GemTrove customers, quoted word for word.
5.0 on Google
★★★★★
“We got the sizing dramatically wrong and Raj was patient… He had it fixed quickly and delivered an excellent ring.”
Richard L.
Google review · ring sizing corrected
★★★★★
“… His prompt communication and willingness to help made what could have been a stressful situation completely hassle-free. The craftsmanship, attention to detail, and level of care provided by Neeraj and the Gemtrove team exceeded my expectations. …”
Seno R.
Google review · engagement ring
★★★★★
“… Trusts isn't something that can be written in a few words, it is something to be earned. Buying something with not only high monetary value but of sentimental value depends on a lot of trusts. …”
Whiz
Google review · anniversary ring upgrade
★★★★★
“… His deep knowledge of diamonds and the do's and don'ts of ring design was invaluable. … The craftsmanship and attention to detail are outstanding, and the rings turned out even more beautiful than we imagined. …”
Tanveer D.
Google review · engagement and wedding rings
★★★★★
“Raj is very friendly and knowledgeable on all things diamonds. I went to him to make an engagement ring for me after seeing all his positive reviews. He helped me design the perfect ring. He listened to everything I was looking for and gave me great advice along the way.”
The Adsta
Google review · engagement ring
Read all GemTrove reviews on Google
What happens from drop-off to pick-up?
- Book a visit. Book an appointment and bring the ring. If a stone is loose, carry the ring in a sealed bag, not on your finger.
- We inspect. Every claw, the head, the band and each stone are checked under magnification.
- We explain. You see what is worn and hear what needs doing now, what can wait, and what we would leave alone.
- You get a quote. Nothing starts until you agree.
- The claws are rebuilt. New metal in the same alloy is added, shaped and brought down over the stone. Heat-sensitive stones are protected or removed first.
- Everything is tested. Each stone is checked for movement, and the ring is cleaned, polished and replated if it is white gold.
- You collect it. We show you the new tips and tell you when the ring should next be looked at.
Can the stone stay in the ring while claws are retipped?
Often, yes. Diamonds, sapphires and rubies usually tolerate the heat of a careful repair. Other stones do not, and those either come out first or the tips are built with a laser welder, which puts very little heat into the ring.
- Emeralds are commonly oiled or filled, and heat can damage the filling. See emerald clarity enhancement.
- Opals and pearls are sensitive to heat and sudden temperature change. See opal rings and their care.
- Filled or coated stones can be spoiled by a torch. See glass filling and fracture filling.
- Any stone you are unsure of is identified before work starts. Please check the lab report before you commit if the stone came with one.
This is one reason a claw repair is safer with a gemologist looking first: the repair method follows the stone, not the other way round. See gemstone care by stone.
When is retipping not the right repair?
- The claw is cracked. A new tip on a cracked claw will fail. The claw is replaced.
- The whole head is worn thin. Retipping every few years onto a worn-out setting costs more over time than one new head.
- The stone is chipped under a claw. We show you the damage first, because a chip changes how the stone can be held. See diamond cavities and chips.
- The ring keeps losing stones. That points to the design or the band flexing, not to one claw.
- The band has worn through underneath. A thin band lets the head move. See re-shanking a ring.
When a ring is past repairing well, the stone can go into a new setting made for it: see setting a loose diamond into a ring and our jewellery remodelling service.
How do you make claws last longer?
Claws wear from rubbing: against desks, steering wheels, gym bars, other rings and bedding. You cannot stop it, but you can slow it.
- Take the ring off for the gym, gardening and heavy lifting. See whether to sleep or work out in your ring.
- Keep rings apart so they do not rub. See how to stop rings rubbing each other.
- Have the claws checked once a year, and straight away after a hard knock.
- If you are choosing a new setting and use your hands a lot, read bezel vs claw settings for everyday wear and settings for active hands.
Where can you get ring claws retipped in Melbourne CBD?
At our showroom on Swanston Street, opposite Melbourne Town Hall. GemTrove has been in business since 2008 and our family has been in the jewellery trade since 1984. Claw work is quoted once we have seen the ring under magnification; we do not quote a price over the phone. Allow up to 5 weeks; many jobs are ready sooner, and some take a day or two.
- Showroom: Unit 903/125 Swanston St, Melbourne VIC 3000 (Level 9), opposite Melbourne Town Hall, by appointment.
- Hours: Monday to Friday 9:30 am to 5:30 pm, Saturday 11:30 am to 1:00 pm, Sunday closed.
- Phone: 0488 878 000.
- Book: book a claw check. If a stone is loose, bring the ring in a sealed bag.
Free consultation
Talk to a gemologist
Compare stones in person or online with Raj Sood, Graduate Gemologist (GIA), AJP (GIA).
Book a consultationFAQ
Common questions
How much does it cost to fix a claw on a ring?
It depends on how many claws are worn, the metal, and whether the claw needs a new tip or replacing altogether. GemTrove quotes after inspecting the ring under magnification, and nothing is done until you agree.
How long does claw retipping take?
Allow up to 5 weeks. Many jobs are finished much sooner, and some simple ones take a day or two. We confirm the time with your quote, before any work begins.
How often do ring claws need retipping?
There is no set interval. It depends on the metal, the thickness of the claws and how the ring is worn. A yearly check tells you where your ring is up to. See when ring claws need retipping.
Can I keep wearing my ring with a worn claw?
It is a risk. If a claw catches, looks flat or the stone moves at all, take the ring off and have it checked. A stone held by three claws out of four can come out with one knock.
Do platinum claws wear better than white gold claws?
They wear differently. Platinum tends to bend and move, while white gold wears away and can become brittle. Both need checking. See white gold vs platinum.
Is retipping the same as re-clawing?
No. Retipping adds metal to the tip of a sound claw. Re-clawing replaces the whole claw. We tell you which your ring needs after looking at it.
Can you retip claws on a ring from another jeweller?
Yes. We work on rings from any jeweller. We check the metal first so the new tips are the same alloy as the ring.
Can claws on earrings, pendants and tennis bracelets be retipped?
Yes. Claws on any piece wear the same way and are rebuilt the same way, including studs, pendants, eternity bands and tennis bracelets.
Terms in this guide

Ask a gemologist
Not sure whether to repair, restore or remake?
Raj Sood is a Graduate Gemologist (GIA) who works alongside our master jewellers. Bring the piece in and he will tell you honestly what it needs, what it does not, and what we would advise against.
Keep learning
Related guides
Care, Repairs & RemodellingWhen Do Ring Claws Need Retipping?
Care, Repairs & RemodellingLoose Stones and Stone Tightening
Engagement Rings & SettingsEngagement Ring Claw Styles Explained
Engagement Rings & SettingsBezel vs Claw Settings for Everyday Wear
GemstonesAustralian Opal Engagement Rings: Wearability and Care
Engagement Rings & SettingsBasket vs Trellis vs Peg Head Settings
Engagement Rings & SettingsBest Engagement Ring Settings for Active Hands
Care, Repairs & RemodellingCan You Sleep or Work Out in Your Ring?Explore more
More guides on this topic
Education
