Skip to content
0488 878 000
  • Custom Engagement Rings, Designed Around You
  • Certified Diamonds, Chosen With GIA Guidance
  • Book a Complimentary Private Consultation
  • Handmade in Melbourne, Shipped Australia-Wide
  • Family Jewellers Since 1984, 5-Star on Google
  1. Education
  2. Care, Repairs & Remodelling
  3. Ring Resizing Melbourne

Jewellery services in Melbourne

Ring Resizing Melbourne

A ring that spins, slides off or will not go over the knuckle can usually be fixed. We measure your finger and the ring, check what the design allows, and quote before anything is cut.

Platinum toi et moi ring with pear and oval diamonds beside a slim plain band, showing a toi et moi wedding band gap fit
Raj SoodReviewed by Raj Sood, Graduate Gemologist (GIA), AJP (GIA)Founder and Graduate Gemologist (GIA) · reviewed 17 November 2026Updated 17 November 20269 min read
Ring Resizing Melbourne

Quick answer

GemTrove resizes rings at our Melbourne CBD showroom, Unit 903/125 Swanston St, Melbourne VIC 3000. Our master jewellers make engagement rings, wedding bands and dress rings larger or smaller in gold and platinum. Raj Sood, a Graduate Gemologist (GIA), checks the ring and its stones first, and you get a quote before any work begins. Allow up to 5 weeks; some jobs take a day or two.

Measured twiceyour finger and the ring, before any metal is cut
Gold and platinumyellow, white and rose gold, and platinum
Quote firstnothing is done until you agree
Up to 5 weeksmany jobs sooner, some in a day or two

What does ring resizing at GemTrove cover?

Ring resizing changes the inside size of a ring so it sits firmly at the base of the finger and still passes over the knuckle. At GemTrove the work is done by master jewellers, and every ring is looked at by a gemologist before it goes to the bench.

  • Sizing down: a ring that spins, slips or has fallen off.
  • Sizing up: a ring that pinches, leaves a deep mark or stops at the knuckle.
  • Engagement rings: solitaires, halos and side-stone rings, with the stones checked afterwards.
  • Wedding bands: plain, patterned and diamond-set bands.
  • Inherited rings: older rings that have been sized before, or are worn thin underneath.
  • Rings bought elsewhere: we size rings from any jeweller, here or overseas.

Resizing is one part of our ring repair and restoration service. If the ring also has worn claws or a loose stone, we deal with those in the same visit: see claw retipping and jewellery repairs in Melbourne.

Which rings do we resize?

Almost every ring can be made to fit. Some are cut and joined in the usual way, and some need a different method. This is how each kind is handled.

RingHow it is resized
Plain wedding bandsCut, sized and joined; wide bands are checked for comfort at the new size
Solitaire engagement ringsSized at the base of the band, then the claws and stone are checked
Halo, three-stone and cluster ringsSized at the base; every small stone is checked afterwards because the curve of the ring has changed
Half eternity and part-set bandsSized in the plain part of the band, within a limit
Full eternity ringsCannot be cut in the usual way; options are sizing beads, a liner, or remaking the ring with stones added or removed
Men's rings and heavy bandsStretched or cut and joined, depending on the width and the metal
Signet ringsSized at the back of the band so the face and any engraving are untouched
Platinum ringsSized with platinum, using a higher heat or a laser welder
Silver ringsSized and re-polished; plated silver is re-plated
Two-tone and patterned bandsSized with care for the pattern; some patterns will not line up again and we tell you first
Engraved bandsSized, then the engraving restored where the join crosses it
Antique and thin bandsOften given a new half shank at the same time, so the ring is the right size and strong again
Rings with opal, emerald, pearl and other soft stonesSized with a laser welder, or with the stone taken out first
Diagram comparing sizing a ring down by removing metal and sizing up by adding a metal insert
Sizing down removes a measured piece of the band; sizing up adds a matching piece.

More on each case: what decides whether a ring can be resized, can a full eternity ring be resized and designing a ring for future resizing.

What if the ring fits the finger but not the knuckle?

Then cutting the band is the wrong answer, because a ring large enough to pass the knuckle will spin once it is on. These are the other ways to make a ring fit.

  • Sizing beads: two small beads of metal inside the base of the band. They grip the finger and stop the ring turning, and can be removed later.
  • A sizing bar or spring insert: a strip inside the band that flexes over the knuckle and closes behind it.
  • A hinged shank: the band opens on a hidden hinge and locks shut, for knuckles swollen by arthritis.
  • A liner (sleeve): a thin band of metal fitted inside a ring that cannot be cut, to make it smaller.
  • A half size or a quarter size: a small change that is often all a ring needs.
  • A temporary guard: for a ring that will fit again, for example after pregnancy.
  • Rings of different sizes on each hand: if you move a ring to another finger, it is sized for that finger.
Diagram of sizing beads placed inside the base of a ring band
Sizing beads sit inside the base of the band and stop a ring spinning.

Each is explained in sizing beads and sizing bars. To check your size before you come in, see the men's ring size guide.

How is a ring made smaller or larger?

To make a ring smaller, a jeweller cuts a measured piece out of the back of the band, brings the two ends together and joins them. The ring is then made round again and the join is filed and polished until it cannot be seen.

To make a ring larger, there are two ways. A plain band can be stretched a small amount. For anything more, or for any ring with stones, the band is cut and a piece of matching metal is added. Adding metal keeps the band at its full thickness; stretching a ring too far makes it thin.

The join is made with a torch or a laser welder, depending on the metal and on how close the stones are. A white gold ring is usually rhodium plated again at the end so the colour is even: see why white gold is rhodium plated and rhodium plating and replating.

Not sure what your piece needs?

Bring it in, or send us clear photos, and our gemologist will tell you what needs doing, what can wait and what we would leave alone.

Ask a gemologist

Can every ring be resized?

Most can, but not all, and not by any amount. Whether a ring can be sized depends on the metal, the design, where the stones sit and what has been done to it before. Our guide to what decides whether a ring can be resized goes through each factor.

RingCan it be resized?
Plain gold or platinum bandYes, up or down
Solitaire or halo engagement ringYes, with the stones checked afterwards
Half eternity or part-set bandUsually, by a limited amount
Full eternity ringNot in the usual way
Tension-set ringNot in the usual way
Tungsten, titanium, cobalt, ceramicNo

Read more on each case: can a full eternity ring be resized, half eternity vs full eternity rings, tension and suspended settings, tungsten jewellery, titanium rings and cobalt, tantalum and carbon fibre rings.

How much does ring resizing cost in Melbourne?

We do not publish a set price for ring resizing, because the same job can be simple on one ring and delicate on another. You get a firm quote after we have measured your finger and looked at the ring, and nothing is done until you agree to it. These are the things that move the price:

  • The metal. Platinum takes more heat and more time to work than gold. See white gold vs platinum.
  • How many sizes. One size is a small change. Several sizes can change the shape of the setting.
  • Up or down. Sizing up beyond a small amount means adding precious metal, which has its own cost.
  • The width and thickness of the band. A wide, heavy band takes more work and more metal than a fine one. See the wedding band width guide.
  • Stones in the band. Pavé, channel and shared-claw stones have to be checked and often tightened after the ring changes shape.
  • The finish. White gold is rhodium plated again; patterns, milgrain and engraving near the join have to be restored.
  • Heat-sensitive stones. Emeralds, opals and pearls may need to come out first, or the join is made by laser.

If the quote is more than you expected, we will tell you whether a simpler fix would do the job. For a small change, sizing beads or a sizing bar can be enough: see sizing beads and sizing bars.

How long does ring resizing take?

Allow up to 5 weeks. Many jobs are finished much sooner, and some simple ones take a day or two. The time depends on the work itself, the metal, and whether a stone or a part has to be sourced.

We confirm the time for your ring with the quote, before any work begins. If you need it back for a date, tell us when you book and we will tell you honestly whether it can be done.

What do GemTrove customers say?

These are Google reviews from GemTrove customers, quoted word for word.

5.0 on Google

★★★★★

“We got the sizing dramatically wrong and Raj was patient… He had it fixed quickly and delivered an excellent ring.”

Richard L.

Google review · ring sizing corrected

★★★★★

“… His prompt communication and willingness to help made what could have been a stressful situation completely hassle-free. The craftsmanship, attention to detail, and level of care provided by Neeraj and the Gemtrove team exceeded my expectations. …”

Seno R.

Google review · engagement ring

★★★★★

“… Trusts isn't something that can be written in a few words, it is something to be earned. Buying something with not only high monetary value but of sentimental value depends on a lot of trusts. …”

Whiz

Google review · anniversary ring upgrade

★★★★★

“… His deep knowledge of diamonds and the do's and don'ts of ring design was invaluable. … The craftsmanship and attention to detail are outstanding, and the rings turned out even more beautiful than we imagined. …”

Tanveer D.

Google review · engagement and wedding rings

★★★★★

“Raj is very friendly and knowledgeable on all things diamonds. I went to him to make an engagement ring for me after seeing all his positive reviews. He helped me design the perfect ring. He listened to everything I was looking for and gave me great advice along the way.”

The Adsta

Google review · engagement ring

Read all GemTrove reviews on Google

What happens from drop-off to pick-up?

  1. Book a visit. Book an appointment at our Swanston Street showroom and bring the ring and the hand it is worn on.
  2. We measure. We size your finger with wide and narrow sizers, and measure the ring as it is now.
  3. We check the ring. Metal, band thickness, earlier joins, claws and every stone are looked at under magnification.
  4. You get a quote. We tell you what can be done, what it costs and what we would not recommend. Nothing starts until you say yes.
  5. The ring is sized at the bench. It is cut, joined, made round and finished by our master jewellers.
  6. Stones and finish are checked. Every stone is tested for movement, the ring is polished and, for white gold, rhodium plated.
  7. You try it on. At pick-up you put the ring on before you leave, and we talk through how to look after it.

Not sure of your size before you come in? Start with the Australian ring size guide, how to measure your ring size at home or the ring size converter. Rings bought overseas often use a different scale: see Australian ring sizes vs US, UK and EU.

When would we advise against resizing?

A jeweller who will size anything is not doing you a favour. These are the cases where we say no, or suggest another way:

  • A full eternity ring. There is no plain metal to cut. The ring is usually remade in the right size instead.
  • A big change on a stone-set band. Bending a pavé or channel band too far opens the seats and loosens the stones. See channel-set diamonds and their repairs and pavé settings explained.
  • A band already worn thin. Sizing a thin band makes it weaker. The better repair is a new back to the band: see re-shanking a ring.
  • A ring that has been sized many times. Each join is a point of stress. We will tell you if one more is one too many.
  • Hard modern metals. Tungsten, ceramic and most titanium rings cannot be cut and joined. They are replaced, not resized.
  • A large knuckle and a slim finger. Making the ring big enough for the knuckle leaves it loose where it sits. Sizing beads or a hinged shank can suit better.

If you are having a ring made, it can be designed so that sizing it later is easy: see designing an engagement ring for future resizing.

Why does a ring stop fitting?

Fingers change more than rings do. Weight, pregnancy, arthritis, medication, heat and the time of day all change finger size. A ring bought as a surprise is often a size or two out: see how to estimate ring size for a surprise proposal.

Width matters as well. A wide band grips more of the finger, so it needs to be slightly larger than a narrow band on the same hand. Men's bands are often wider for this reason: see the men's ring size guide. And a ring that suddenly feels tight may simply be bent: see why rings go out of round.

What should you check after a ring is resized?

  • The fit. It should go over the knuckle with a little resistance and sit without spinning.
  • The join. You should not be able to see or feel it.
  • The shape. The ring should be round and the band an even thickness.
  • The stones. Nothing should move or rattle. See loose stones and stone tightening.
  • The inside. Any hallmark or engraving near the join should have been kept or restored. See Australian hallmarks and metal stamps.

Give a newly sized ring a week of normal wear before deciding the fit is wrong, then look after it with our engagement ring care guide.

Where can you get a ring resized in Melbourne CBD?

At our showroom on Swanston Street, opposite Melbourne Town Hall. GemTrove has been in business since 2008 and our family has been in the jewellery trade since 1984. Ring resizing is quoted once we have seen the ring; we do not quote a price over the phone. Allow up to 5 weeks; many jobs are ready sooner, and some take a day or two.

  • Showroom: Unit 903/125 Swanston St, Melbourne VIC 3000 (Level 9), opposite Melbourne Town Hall, by appointment.
  • Hours: Monday to Friday 9:30 am to 5:30 pm, Saturday 11:30 am to 1:00 pm, Sunday closed.
  • Phone: 0488 878 000.
  • Book: book a ring resizing visit. Bring the ring, and come at a time of day when your hands are at their normal size.

Free consultation

Talk to a gemologist

Compare stones in person or online with Raj Sood, Graduate Gemologist (GIA), AJP (GIA).

Book a consultation

FAQ

Common questions

How much does it cost to resize a ring in Melbourne?

It depends on the metal, how many sizes the ring has to move, whether it goes up or down, and whether there are stones in the band. GemTrove quotes after measuring your finger and checking the ring, and nothing is done until you agree.

How long does ring resizing take?

Allow up to 5 weeks. Many jobs are finished much sooner, and some simple ones take a day or two. We confirm the time with your quote, before any work begins.

Will a jeweller resize a ring for free?

Some jewellers include a first resize with a ring they made, so check your paperwork or ask the jeweller who made it. For a GemTrove ring, ask us about your ring when you book.

Can you resize a ring bought from another jeweller?

Yes. We size rings from any jeweller, including rings bought overseas. We check the metal and the stones first, because we did not make the ring and need to know how it was built.

Can a ring be resized more than once?

Yes, but not without limit. Each resize puts a join in the band. We check for earlier joins and tell you if the band should be rebuilt instead. See when to repair or replace a band.

Does resizing damage a ring?

Done properly, no. The join is as strong as the band and cannot be seen. The risk is in pushing a ring further than its design allows, which is why we check it and tell you the limit first.

How many sizes can a ring go up or down?

A plain band can usually move a few sizes. A ring with stones in the band can move less, because the stone seats change shape. We tell you the safe range for your ring once we have seen it.

Can a white gold ring be resized?

Yes. It is sized like any gold ring and then rhodium plated again, so the join and the rest of the band are the same bright white. See how often to replate white gold.

Can men's rings, signet rings and silver rings be resized?

Yes. Heavy bands, signet rings, silver and platinum rings can all be resized. Signet rings are sized at the back so the face and engraving are untouched.

Raj Sood, Graduate Gemologist (GIA), showing a client an engagement ring

Ask a gemologist

Not sure whether to repair, restore or remake?

Raj Sood is a Graduate Gemologist (GIA) who works alongside our master jewellers. Bring the piece in and he will tell you honestly what it needs, what it does not, and what we would advise against.

Education

Explore every topic

Proudly Australian Made and OwnedVisit Us in Melbourne