- Education
- Care, Repairs & Remodelling
- Rhodium Plating Melbourne
Jewellery services in Melbourne
Rhodium Plating Melbourne
White gold that has turned yellow or dull has not gone bad: its rhodium plating has worn through. We polish the piece, re-plate it, and it comes back bright white.

Quick answer
GemTrove rhodium plates white gold jewellery at our Melbourne CBD showroom, Unit 903/125 Swanston St, Melbourne VIC 3000. Rings, earrings, pendants, chains and bracelets are checked, polished and re-plated so they are bright white again. You get a quote before any work begins. Allow up to 5 weeks; many jobs are finished sooner.
What is rhodium plating?
Rhodium is a bright white metal from the platinum family. White gold is yellow gold mixed with white metals, so on its own it is a soft, warm grey-white. To give it the crisp white most people expect, almost all white gold jewellery is finished with a very thin layer of rhodium. See why white gold is rhodium plated.
That layer wears. On a ring it wears first on the underside of the band and on any high edge, and the warmer colour of the gold shows through. Nothing is wrong with the ring. It needs polishing and plating again, which is routine work.
- Replating white gold that has turned yellow, dull or patchy.
- Plating after a repair: resizing, retipping and soldering all leave bare gold that has to be plated to match.
- Plating part of a piece: white claws on a yellow gold ring, or the white half of a two-tone band.
- Plating a newly made piece as its final finish.
- Black rhodium for a dark grey finish, where a design calls for it.
For the full background, read rhodium plating and replating.
Which pieces can be rhodium plated?
| Piece | What to know |
|---|---|
| White gold engagement rings | The most common job. The claws and stones are checked before plating |
| White gold wedding and eternity bands | Bands rub against the ring beside them, so they wear fastest |
| Earrings and pendants | Wear slowly, because they touch little; often plated once in many years |
| Chains and bracelets | Can be plated; the clasp and links are checked first |
| Two-tone rings | The yellow or rose part is masked so only the white part is plated |
| Yellow gold claws around a diamond | Can be plated white so the diamond looks whiter |
| Sterling silver | Can be rhodium plated to slow tarnish |
| Platinum | Does not need plating; it is white all the way through and is polished instead |
| Rings with soft or porous stones | Opals, pearls, emeralds and turquoise are protected or removed first |
Not sure whether your ring is white gold or platinum? Look at the stamp inside the band, and see Australian hallmarks and metal stamps and white gold compared with platinum. Related reading: two-tone and mixed-metal rings, sterling silver jewellery and, if a ring irritates your skin, metal allergies and nickel-free options.
How do you know your ring needs replating?
- The underside of the band looks yellow or cream beside the top.
- The ring looks dull even after cleaning.
- There are patches: bright white in the protected places, warmer on the edges.
- Your wedding band and engagement ring no longer match, because one has worn faster.
- It has just been repaired or resized, and the new metal shows.
How often depends on how the ring is worn. A ring worn every day, with hand sanitiser, chlorine and hard surfaces, loses its plating much sooner than one worn on weekends. Our rhodium replating schedule explains what speeds it up.
How much does rhodium plating cost in Melbourne?
We do not publish a set price for rhodium plating, because the plating itself is only part of the job. The quote depends on the piece once we have seen it.
- The size of the piece. A slim band takes less than a wide ring, a bracelet or a chain.
- How much polishing it needs. Scratches have to come out first, or the plating will show them.
- Two-tone work. Masking one colour while the other is plated takes longer.
- Stones. Soft and porous stones have to be protected or taken out.
- Repairs found on the way. A worn claw or a thin band is better fixed before plating than after.
- More than one piece. A wedding set is usually done together so the rings match.
We tell you the price before any work begins, and we tell you if the ring needs something else first, such as a ring repair. Plating is usually done together with a professional clean and polish; see also professional cleaning compared with home cleaning.
Not sure what your piece needs?
Bring it in, or send us clear photos, and our gemologist will tell you what needs doing, what can wait and what we would leave alone.
How long does rhodium plating take?
Allow up to 5 weeks. Many jobs are finished much sooner, and some simple ones take a day or two. The time depends on the work itself, the metal, and whether a stone or a part has to be sourced.
We confirm the time for your piece with the quote, before any work begins. If you need it back for a date, tell us when you book and we will tell you honestly whether it can be done.
What do GemTrove customers say?
These are Google reviews from GemTrove customers, quoted word for word.
5.0 on Google
★★★★★
“We got the sizing dramatically wrong and Raj was patient… He had it fixed quickly and delivered an excellent ring.”
Richard L.
Google review · ring sizing corrected
★★★★★
“… His prompt communication and willingness to help made what could have been a stressful situation completely hassle-free. The craftsmanship, attention to detail, and level of care provided by Neeraj and the Gemtrove team exceeded my expectations. …”
Seno R.
Google review · engagement ring
★★★★★
“… Trusts isn't something that can be written in a few words, it is something to be earned. Buying something with not only high monetary value but of sentimental value depends on a lot of trusts. …”
Whiz
Google review · anniversary ring upgrade
★★★★★
“… His deep knowledge of diamonds and the do's and don'ts of ring design was invaluable. … The craftsmanship and attention to detail are outstanding, and the rings turned out even more beautiful than we imagined. …”
Tanveer D.
Google review · engagement and wedding rings
★★★★★
“Raj is very friendly and knowledgeable on all things diamonds. I went to him to make an engagement ring for me after seeing all his positive reviews. He helped me design the perfect ring. He listened to everything I was looking for and gave me great advice along the way.”
The Adsta
Google review · engagement ring
Read all GemTrove reviews on Google
What happens from drop-off to pick-up?
- Book a visit. Bring the piece to our showroom on Swanston Street.
- We inspect. The claws, the stones and the band are checked, because plating hides nothing and fixes nothing.
- You get a quote. Nothing is done until you agree.
- The piece is cleaned and polished. Old plating and surface scratches are removed.
- It is plated. The piece is cleaned again, then plated in a rhodium bath.
- It is checked. Colour, coverage and every stone are checked.
- You collect it. We tell you how to make the plating last.
What can rhodium plating not do?
- Last for ever. It is a surface finish, and it wears with the ring.
- Hide deep scratches or dents. Those are polished or repaired first.
- Turn yellow gold into white gold. A yellow gold ring can be plated white, but the yellow shows again as soon as the plating wears, so we advise against it for a ring worn every day.
- Fix a worn claw or a thin band. Plating adds colour, not strength. See claw retipping.
- Be done safely over every stone. Some stones have to come out first.
If a ring needs plating again and again, it may be worth remaking it in platinum. See platinum jewellery and jewellery remodelling.
How do you make rhodium plating last longer?
- Take rings off for the gym, gardening, cleaning and swimming. See sleeping and working out in your ring.
- Keep white gold away from chlorine and bleach. See sunscreen, chlorine and your jewellery.
- Put rings on after hand cream and sanitiser have dried.
- Store pieces apart so they do not rub. See how to store jewellery.
- Clean gently at home, without abrasive pastes. See how to clean a diamond ring at home.
More in our engagement ring care guide and jewellery care and maintenance.
Where can you get rhodium plating in Melbourne CBD?
At our showroom on Swanston Street. GemTrove has been in business since 2008, and our family has been in the jewellery trade since 1984. Plating is quoted once we have seen the piece; we do not quote a price over the phone.
- Showroom: Unit 903/125 Swanston St, Melbourne VIC 3000 (Level 9), opposite Melbourne Town Hall, by appointment.
- Hours: Monday to Friday 9:30 am to 5:30 pm, Saturday 11:30 am to 1:00 pm, Sunday closed.
- Phone: 0488 878 000.
- Book: book an appointment. Bring the piece, and the ring it is worn beside if you want the two to match.
Free consultation
Talk to a gemologist
Compare stones in person or online with Raj Sood, Graduate Gemologist (GIA), AJP (GIA).
Book a consultationFAQ
Common questions
How much does rhodium plating cost?
It depends on the size of the piece, how much polishing it needs and whether it is two-tone or stone set. GemTrove quotes after seeing the piece, and nothing is done until you agree.
How long does rhodium plating take?
Allow up to 5 weeks. Many jobs are finished much sooner, and some simple ones take a day or two. We confirm the time with your quote, before any work begins.
Why has my white gold ring turned yellow?
Its rhodium plating has worn through and the natural colour of the white gold is showing. The ring is polished and plated again, and it comes back bright white.
How often does white gold need replating?
It depends on wear. A ring worn every day needs it far sooner than earrings or a pendant. We can tell you how yours is wearing when we see it.
Can yellow gold be rhodium plated?
It can, but the yellow shows again as the plating wears, so we advise against it for a ring worn every day.
Does platinum need rhodium plating?
No. Platinum is white all the way through. It is polished to restore its finish.
Is rhodium plating safe for my diamond?
Yes. Diamonds, sapphires and rubies are not harmed. Soft and porous stones such as opals, pearls and emeralds are protected or removed first.
Terms in this guide

Ask a gemologist
Not sure whether to repair, restore or remake?
Raj Sood is a Graduate Gemologist (GIA) who works alongside our master jewellers. Bring the piece in and he will tell you honestly what it needs, what it does not, and what we would advise against.
Keep learning
Related guides
MetalsRhodium Plating and Replating
MetalsWhy White Gold Is Rhodium Plated
Care, Repairs & RemodellingRhodium Replating Schedule
MetalsWhite Gold vs Platinum
MetalsAustralian Hallmarks and Metal Stamps
Care, Repairs & RemodellingCan You Sleep or Work Out in Your Ring?
Care, Repairs & RemodellingClaw Retipping Melbourne
Care, Repairs & RemodellingEngagement Ring Care GuideExplore more
More guides on this topic
Education
