- Education
- Care, Repairs & Remodelling
- Jewellery Repairers in Melbourne CBD: 8 Compared Side by Side
Neutral guide, updated November 2026
Jewellery Repairers in Melbourne CBD: 8 Compared Side by Side
Eight jewellers in the Melbourne CBD that repair jewellery, listed in alphabetical order with what each one says about itself on its own website. No rankings and no opinions: where they are, what they say they repair, and a checklist for choosing between them.

Quick answer
Which jewellery repairer in the Melbourne CBD suits you depends on the piece, the repair and whether you want to walk in or book. Eight jewellers on this list are DG & Co. Jewellery, Franco Jewellers, GemTrove, Hardy Brothers, Joseph George, MDT Design, Michael Hill and Tiffany & Co. GemTrove wrote this guide and is one of them.
Which jewellers repair jewellery in the Melbourne CBD?
Most jewellers in the city centre take in repairs, and they differ less in what they can do than in how they work: some have a workshop behind the shop, some are upstairs and see you by appointment, and some welcome walk-ins. The eight below are established jewellers with a Melbourne CBD address that say they repair jewellery. They are listed alphabetically, not ranked.
- DG & Co. Jewellery (Level 27, 101 Collins Street).
- Franco Jewellers (Suite 904, 220 Collins Street).
- GemTrove (Unit 903, 125 Swanston Street).
- Hardy Brothers (338 Collins Street).
- Joseph George (Shop 8a, 271 Collins Street).
- MDT Design (348 Collins Street).
- Michael Hill (280-282 Bourke Street Mall).
- Tiffany & Co. (267 Collins Street).
Declared interest: GemTrove wrote this guide and is one of the eight on it. To keep it fair, every other entry uses only what that business says on its own website, we give no scores, and we say nothing about anyone's quality, prices or speed.
How was this list put together?
- Who is on it: established jewellers with a Melbourne CBD address on their website that say they repair jewellery, chosen by GemTrove, plus GemTrove itself.
- Where the facts come from: each business's own website, read on 17 November 2026. Nothing is taken from review sites, forums or advertising.
- What is left out on purpose: review counts, star ratings, prices, time frames and any judgement of quality. Those change often and are better checked at the source on the day you are deciding.
- Order: alphabetical. Position on the page means nothing.
- Updates: the page is re-read against each website about once a month, and the date at the top changes with it. If a detail about your business is out of date, tell us and it will be corrected.
What does each Melbourne CBD jeweller say about its repairs?
Each entry below is a plain summary of what the business's own website said on 17 November 2026. Follow the name to the source to check the current details.
DG & Co. Jewellery (diamondgold.com.au). Its website says it repairs all types of jewellery and metals in the Melbourne CBD, including ring resizing, reshanking, claw tipping, gold and rhodium plating, chain and clasp repair, diamond and gemstone replacement and diamond setting, and that each piece is assessed before a quote is given.
Franco Jewellers (franco.com.au). Its website describes jewellery repairs and restoration at its Collins Street boutique, carried out by its master jeweller, and lists ring resizing, claw re-tipping, stone replacement and chain repairs. It says each piece is examined before a quote.
Hardy Brothers (hardybrothers.com.au). Its website gives its Melbourne boutique as 338 Collins Street and says its workshop's jewellers handle ring resizing, reclawing and resetting, polishing and finishing, watch repairs and custom rings.
Joseph George (josephgeorge.com.au). Its website describes jewellery repairs in the Melbourne CBD, listing ring resizing, claw re-tipping, stone replacement, re-polishing and restoration, and states more than 50 years of experience.
MDT Design (mdtdesign.com.au). Its website says its jewellery repairs are done in an on-site workshop behind its Collins Street boutique, on pieces regardless of where they were bought, and covers ring, earring and bracelet repairs in gold and platinum, including antique ring restoration.
Michael Hill (michaelhill.com.au). Its website describes Re:store, a repair service for Michael Hill pieces: the piece is brought to a store such as Bourke Street, assessed and sometimes quoted on the spot, repaired by its repairs team and returned to the store. Listed services include resizing, rhodium plating, claw retipping, re-shanking and chain soldering.
Tiffany & Co. (tiffany.com.au). Its website gives its Melbourne store as 267 Collins Street and lists the services there as including jewellery cleaning and repair, engraving and watch repair. Appointments can be booked.
GemTrove. GemTrove wrote this guide. Repairs are seen by appointment at Unit 903/125 Swanston St, Melbourne VIC 3000, where Raj Sood, a Graduate Gemologist (GIA), inspects each piece and its stones before our master jewellers quote. We publish no price list for repairs; a quote is given once the piece has been seen. The detail is on our pages for jewellery repairs in Melbourne, ring repair, ring resizing, claw retipping, lost stone replacement, chain repair and earring repair.
Melbourne CBD jewellery repairers compared in one table
| Business | Where (from its website) | What its website offers |
|---|---|---|
| DG & Co. Jewellery | Level 27, 101 Collins Street | Repairs across all jewellery types |
| Franco Jewellers | Suite 904, 220 Collins Street | Repairs and restoration |
| GemTrove | Unit 903, 125 Swanston Street | Repairs assessed by a gemologist first |
| Hardy Brothers | 338 Collins Street | Resizing, reclawing, polishing, watches |
| Joseph George | Shop 8a, 271 Collins Street | Resizing, claws, stones, restoration |
| MDT Design | 348 Collins Street | On-site repairs and restoration |
| Michael Hill | 280-282 Bourke Street Mall | Re:store repairs for Michael Hill pieces |
| Tiffany & Co. | 267 Collins Street | Cleaning and repair; engraving; watches |
The wording in the table is shortened from each website as read on 17 November 2026. It describes how each business presents itself, not how one compares with another.
Not sure what your piece needs?
Bring it in, or send us clear photos, and our gemologist will tell you what needs doing, what can wait and what we would leave alone.
How do you compare jewellery repairers fairly?
A repair is judged by whether it lasts, and you cannot see that on the day you collect it. What you can check beforehand is how the jeweller works. These are the things worth comparing:
- Is the piece inspected before it is quoted? A price given over the phone is a guess. See when ring claws need retipping for what an inspection looks for.
- Where is the work done? On the premises, in the jeweller's own workshop elsewhere, or sent out. Ask, and ask who handles your piece.
- Who looks at the stones? Heat-sensitive and treated stones have to be identified before a torch goes near them. See gemstone care by stone and gemstone treatments A to Z.
- What is recorded when you leave the piece? A written description of the item and its stones protects both sides.
- Will they tell you when not to repair? A worn-out setting is better remade. See when to repair or replace a band and what can be reused safely.
- Do they work on the metal you have? Platinum, white gold and older alloys are handled differently. See white gold vs platinum and rhodium plating and replating.
What should you ask before leaving a piece for repair?
- What exactly is wrong? Ask to be shown under magnification. See loose stones and stone tightening.
- What needs doing now, and what can wait?
- What will it cost, and what could change that figure?
- How long will it take? Tell them if you need it for a date.
- Where will it be while it is being repaired, and is it covered? See how jewellery insurance works in Australia.
- What will I get in writing? A receipt that describes the piece and the work.
- What should I check when I collect it? Stones secure, join invisible, finish even.
For rings in particular, read what decides whether a ring can be resized, whether a full eternity ring can be resized and re-shanking a ring before you go, so you know what the answers mean. If a stone has just come out, start with what to do if a diamond falls out of your ring.
Which repairs can most CBD jewellers do, and which need a specialist?
| Repair | Usually done by | Worth knowing |
|---|---|---|
| Ring resizing | Most jewellers | Not every ring can be sized |
| Claw retipping | Most jewellers | The stone may need to come out |
| Chain and clasp repair | Most jewellers | Hollow chains are harder |
| Stone replacement | Jewellers who source stones | Matching is the skilled part |
| Pearl restringing | Some jewellers | Ask if it is done in house |
| Stone recutting | Specialist cutters | The stone loses a little weight |
| Mechanical watch service | Watchmakers | Different trade from jewellery |
See our guides to necklace chain types, earring back types, pearl care and restringing and why rings go out of round for the background on each.
Where does GemTrove fit?
GemTrove is a by-appointment jeweller on Level 9 at 125 Swanston Street, opposite Melbourne Town Hall. We are not a walk-in repair counter: every piece is looked at by a Graduate Gemologist (GIA) first, and the quote follows the inspection. That suits a repair where the stones matter. It suits a quick clasp fix less well than a walk-in workshop does, and we would rather say so.
GemTrove has been in business since 2008, and our family has been in the jewellery trade since 1984. For what we repair and how, see jewellery repairs in Melbourne; for pieces past repairing, see jewellery remodelling; and for paperwork afterwards, see jewellery and diamond valuation.
- Showroom: Unit 903/125 Swanston St, Melbourne VIC 3000 (Level 9), by appointment.
- Hours: Monday to Friday 9:30 am to 5:30 pm, Saturday 11:30 am to 1:00 pm, Sunday closed.
- Phone: 0488 878 000.
- Book: book a repair visit.
Free consultation
Talk to a gemologist
Compare stones in person or online with Raj Sood, Graduate Gemologist (GIA), AJP (GIA).
Book a consultationFAQ
Common questions
Which jewellers repair jewellery in the Melbourne CBD?
It depends on the piece and the repair. Eight CBD jewellers that repair jewellery are DG & Co. Jewellery, Franco Jewellers, GemTrove, Hardy Brothers, Joseph George, MDT Design, Michael Hill and Tiffany & Co. This guide lists what each says on its own website and does not rank them.
Where can I get jewellery repaired in the Melbourne CBD?
Most jewellers on and around Collins Street and Swanston Street take in repairs. Check each one's own website for its current address, hours and whether it takes walk-ins or works by appointment.
How much do jewellery repairs cost in Melbourne?
It depends on the piece, the metal and the work, and a repair cannot be priced properly until it has been inspected. This guide quotes no prices; ask each jeweller for a quote after they have seen the piece.
How do I choose a jewellery repairer?
Ask whether the piece is inspected before it is quoted, where the work is done, who checks the stones, and what you will be given in writing. Ask each one when they would advise against a repair.
Can any jeweller repair any piece?
No. Costume jewellery, hollow pieces, tungsten and titanium rings and some treated gemstones cannot always be repaired. A good jeweller tells you before taking the job.
Is this list a ranking?
No. The businesses are in alphabetical order, with facts taken from each one's own website on the date shown. GemTrove wrote the guide and is one of the eight.
Does GemTrove do walk-in repairs?
No. GemTrove works by appointment, so a gemologist can inspect the piece properly when you arrive. Book online or call 0488 878 000.
Terms in this guide

Ask a gemologist
Not sure whether to repair, restore or remake?
Raj Sood is a Graduate Gemologist (GIA) who works alongside our master jewellers. Bring the piece in and he will tell you honestly what it needs, what it does not, and what we would advise against.
Keep learning
Related guides
Care, Repairs & RemodellingWhen Do Ring Claws Need Retipping?
Care, Repairs & RemodellingWhen to Repair vs Replace a Band
Care, Repairs & RemodellingLoose Stones and Stone Tightening
Care, Repairs & RemodellingEngagement Ring Care Guide
Wedding Bands & EternityCan a Full-Eternity Ring Be Resized?
Care, Repairs & RemodellingChain Repair Melbourne
Care, Repairs & RemodellingClaw Retipping Melbourne
Jewellery TypesEarring Back TypesExplore more
More guides on this topic
Education
